for Heartland, TX
Our Reviews by City
Cassandra - Heartland, TX
Appreciate the honesty and great service!
Skye - Heartland, TX
Stacy - Heartland, TX
2 System AC tune. Upon inspection I found some things not allowing systems to operate as should. Worked on a 2 ton Carrier Airhandler and a 2.5 ton Carrier airhandler. Evaporator could and blower wheels both have dirt build up on them causing air flow restrictions. Made recommendations to better the system and help extend the life.
No cool. Upon arrival upstairs System not cooling. Outside System was not turning on. Replaced bad part and System came on. Also checked refrigerant levels to ensure they're within range and allow for proper cooling.
Air conditioning installation, maintenance and service. Install quality check. Discussed warranty paperwork with customer and answered questions about the new air conditioning system.
Air conditioning installation maintenance and service. Installed new 16 SEER Amana heat pump system
Air conditioning installation service and maintenance. No cool customer states temperature difference is only 4 degrees. Performed courtesy leak search and found leaking evaporator.
Cooling maintenance. Working on a Lennox 14 seer heat pump. Found biological growth. Recommended adding a UV light to help prevent this from growing and spreading through out the system.
Electrical repair on your air conditioning system. Checking all components to keep your system lasting for years and helping you save on your utility bills.
5 ton carrier
Air conditioning service call, tuning up a carrier system
Air conditioning service call, carrier high efficiency 4 ton system, cleaning coils, servicing condenser, checking all parts of the system
Service call on Carrier air conditioning, no cooling upstairs unit. Added freon and cleared drain line. System ready for the summer
Heating maintenance call on 5-ton Carrier electric heat system.Checked evaporator coil,electrical connection,drain pan,blower motor&wheel.secondary motor,ducts,thermostat,heat strips and cleared drain lines.Start up system and check operation in heat mode.